Modular Roof Rack For The Ford Bronco 2-Door
Modular Roof Rack For The Ford Bronco 2-Door
Modular Roof Rack For The Ford Bronco 2-Door
Modular Roof Rack For The Ford Bronco 2-Door
Modular Roof Rack For The Ford Bronco 2-Door
Modular Roof Rack For The Ford Bronco 2-Door
Modular Roof Rack For The Ford Bronco 2-Door
Modular Roof Rack For The Ford Bronco 2-Door
Modular Roof Rack For The Ford Bronco 2-Door
Modular Roof Rack For The Ford Bronco 2-Door
Modular Roof Rack For The Ford Bronco 2-Door
Modular Roof Rack For The Ford Bronco 2-Door
Modular Roof Rack For The Ford Bronco 2-Door
Modular Roof Rack For The Ford Bronco 2-Door

Modular Roof Rack For The Ford Bronco 2-Door

TR-FB-2DR-MRR


  • In stock, ready to ship
  • Backordered, shipping soon
Wind Deflector?
Pak Rax?
Sale price$1,199.99
/
Shipping calculated at checkout.

Specs:

  • Overall height added to your Bronco- 3.845" from the center of the hardtop or 3.345" from the highest point of the hardtop (outer edges).
  • Pak Rax load rating: 70 lbs per side respectively
  • Static load rating of the rack: 850 lbs evenly distributed across the rack
  • Dynamic load rating of the rack: 300 lbs evenly distributed across the rack

Attributes of the TrailRax Modular Roof Rack for the Ford Bronco:

  • Higher weight capacity than the OEM roof rack and others
  • Easy bolt-on install
  • Wind deflector to minimize annoying wind noise issues
  • Cutouts for high-performance Heretic Studio lights
  • All Aluminum construction to avoid any rust
  • Low profile to fit in garages and more
  • Offer the ability to remove the Hardtop panels while the rack is installed

TrailRax, Inc. Limited Lifetime Warranty Policy

TrailRax, Inc. offers a Limited Lifetime Warranty on all TrailRax products. By placing an order, you understand that it constitutes your understanding and acceptance of this policy.

1. Warranty Duration and Scope

  • This Limited Lifetime Warranty remains in effect for the duration the original retail purchaser owns the product and it is installed on the original vehicle. This warranty is NON-TRANSFERRABLE.

A. Covered Defects

This warranty is limited to product failure under normal operating conditions and covers:

  • Defects in materials used to manufacture our products.

  • Defects in workmanship.

  • Broken components deemed to have structurally failed under proper installation, necessary components for weight bearing, and normal use. Specifically, this warranty covers the structural failure of load-bearing components due to material defects or premature breakdown occurring during typical, non-abusive use.

B. Exclusions (What is Not Covered)

This warranty does not cover the following:

  • Finish/Cosmetic Damage: Any chips, scratches, fading, rust, or flaking to the finish or powder-coating.

  • External Damage: Defects or damage resulting from accidents, acts of nature, vehicle collisions, or trail damage.

  • Abuse & Misuse: Defects caused by competition/racing, overloading beyond the product's rated capacity, or poor maintenance practices.

  • Improper Use: Damage resulting from incorrect assembly, incorrect load bearing pieces, or installation, including, but not limited to, cross-threading hardware.

  • Third-Party Products: Defects or damage to products manufactured by other vendors and sold through TrailRax, Inc.

2. Remedy and Claims Process

If a covered defect is discovered, TrailRax will, at its sole discretion, repair or replace the product with a new or reconditioned product at no charge to you, provided the product is returned during the warranty period.

A. Warranty Claim Procedure

Prior to returning any product, you must obtain a Return Merchandise Authorization Number (RMA#) by contacting TrailRax at the address or phone number provided below.

The original purchaser is responsible for shipping expenses to return the product to TrailRax. 

385-777-2601

1654 W 1250 S, Unit 2

Woods Cross, Utah 84087

 

B. Shipping and Return

If the repairs are covered by this warranty and the product was properly shipped to TrailRax, TrailRax will pay the return shipping charges back to the customer (domestic addresses only).

To expedite your warranty claim, please ensure your return package includes:

  • The assigned RMA # (clearly marked on the outside of the box).

  • A copy of the Original Proof of Purchase.

  • Your current name, address, and telephone number.

  • A detailed description of the defect/problem for which service is requested.

  • The product must be properly packaged to prevent damage during transit.

3. Warranty Void Actions

TRAILRAX HAS THE RIGHT TO REFUSE/VOID A WARRANTY if the product falls under any of the following conditions. Products with voided warranties will not be eligible for exchange, refund, or warranty consideration.

  • Non-Authorized Purchase: The product was not purchased directly from TrailRax or an authorized TrailRax retailer or distributor.

  • Lack of Documentation: Valid Proof of Purchase cannot be provided.

  • Unauthorized Modification: The product or its installation was modified, changed, altered, or customized in any way from its original design.

  • Improper Application: Installation of the product on the wrong vehicle or model, or reinstallation of the product on an alternate vehicle.

4. Limitation of Liability

Replacement of a defective product or the issuance of a credit/refund (as determined by TrailRax) is the purchaser’s exclusive remedy under this warranty.

TrailRax cannot be held financially responsible for any labor associated with the installation or removal of our products.

TrailRax, Inc. is not liable for any consequential, incidental, or special damages, including, but not limited to, any damage to the purchaser's vehicle, cargo, or any other person or property that results from the use or failure of a TrailRax product.

 

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Key Features:

  • Fits: Ford Bronco and Bronco Raptor (6th Gen, 2-Door, 2021+)
  • Overall height added to your Bronco- 3.845" from the center of the hardtop or 3.345" from the highest point of the hardtop (outer edges).
  • Pak Rax load rating: 70 lbs per side evenly distributed
  • Static load rating of the rack: 850 lbs evenly distributed across the rack verified in CAD and real life testing
  • Dynamic load rating of the rack: 300 lbs evenly distributed across the rack  verified in CAD and real life testing
    • These ratings are rated and measured WITH optioned Pak Rax. The Pak Rax allows for the distribution of weight to the body of the Bronco allowing the best stability and carrying load capacity.
    • Higher weight capacity than the OEM roof rack and others
    • Easy bolt-on rack install
    • Wind deflector to minimize wind noise
    • Cutouts for high-performance off-road lights
    • All aluminum construction to avoid rust and corrosion
    • Patented Pak Rax option to increase storage capabilities

    TrailRax was the first to build a roof rack for the Ford Bronco 6th Gen— and it’s still the best one on the market. The long-awaited TrailRax Ford Bronco 2-Door Roof Rack is designed to work seamlessly with the TrailRax Pak Rax, giving you endless gear-mounting options for overlanding and off-road adventures. Built from 5052 3/16" aluminum, the one-piece side panels offer extreme rigidity, durability, and load capacity, with a 90-degree bent channel providing 360° mounting flexibility for additional accessories.

    Our precision anodized black aluminum extrusions (TSLOTS) are made in Utah, cut to length, and stress-tested for maximum weight capacity and minimal deflection. Crossmembers include machined cutouts for easy hardware installation without removing the bars.

    The included wind deflector minimizes wind noise, and the cutout is compatible with Heretic Studio or Baja Designs 40" off-road lights, allowing flush mounting while keeping the rack level.

    Installation is simple: the clamping system mounts to the OEM Ford hardtop, with front rails attaching to existing windshield studs for added stability. The Pak Rax mounts directly to the side panels, distributing weight and reducing stress on the MIC hardtop.

    This rack is perfect for overlanders, desert racers, and off-road enthusiasts, with modularity that allows upgrades and accessory additions over time. MIC hardtop required. Fits all trims of the Ford Bronco 2-Door.

    Brand's and Products recommend using with our TRMR Rack:

    While you are not limited to these brands, these brands worked with us along the way in designing the rack. This gives us and them the ability to work with their products within the design to make sure everything fits properly and works together in harmony. If you are looking to accessorize your TRMR Rack, look no further than these brands if you want high-quality products that fit directly to your TRMR Rack with no headaches.

    Hit this link!

    Ford rates the Bronco roof with a factory rack at "Max load 110 lbs dynamic and 450 lbs static evenly distributed." All these weights will be at your discretion as they are above Ford's "recommended" capacities. We build our rack to be capable on its own of withstanding 850 lbs static, and 300 lbs dynamic. GVWR and other factors such as roof materials, the center of gravity, and wind dynamics all apply to any load you put on top of a vehicle, and you, as the user, are responsible for the safe loading and operation of your vehicle. Please review your Owner's Manual to review your recommended payloads for your Bronco. If you need more information please contact us at info@TrailRax.com.

    Our 90 degree bend

    We added a bend into our 5052 Aluminum side panels to drastically increase durability and strength. This helps us achieve the highest rated rack for its low profile. This bend also offers full 360 degree mounting area on the rack, you are now not limited to where your TSLOTS are mounted.

    Our wind Deflector angle

    We engineer the angle of the deflector to match the angles of your Bronco for minimal wind noise and a perfect look, almost like it should have come from factory with the TrailRax Modular Roof Rack.

    Our Integrated Pak Rax option

    Our Pak Rax option is a patented specialty of ours that we designed to be an additional storage solution. In this case with the Bronco, It actually allows for a higher load capacity than factory ratings. The Pak Rax offers more stability and weight load capability because it distributes weight to the body of the Bronco putting less stress on the MIC Hardtop.