Modular Half Rack For The Ford Bronco
Modular Half Rack For The Ford Bronco
Modular Half Rack For The Ford Bronco
Modular Half Rack For The Ford Bronco
Modular Half Rack For The Ford Bronco
Modular Half Rack For The Ford Bronco
Modular Half Rack For The Ford Bronco
Modular Half Rack For The Ford Bronco
Modular Half Rack For The Ford Bronco
Modular Half Rack For The Ford Bronco
Modular Half Rack For The Ford Bronco
Modular Half Rack For The Ford Bronco
Modular Half Rack For The Ford Bronco

Modular Half Rack For The Ford Bronco

TR-FB-2DR-MRR-HR


  • In stock, ready to ship
  • Backordered, shipping soon
Rack Style
Pak Rax?
Sale price$849.99
/
Shipping calculated at checkout.

Specs:

  • Overall height added to your Bronco- 3.845" from the center of the hardtop or 3.345" from the highest point of the hardtop (outer edges).
  • Static load rating for half-rack: 300 lbs evenly distributed across the rack
  • Dynamic load rating for half-rack: 150 lbs evenly distributed across the rack
  • These ratings are rated and measured WITH optioned Pak Rax. The Pak Rax allows for the distribution of weight to the body of the Bronco allowing the best stability and carrying load capacity.

Attributes of the TrailRax Modular Roof Rack for the Ford Bronco:

  • Higher weight capacity than the OEM roof rack and others
  • Easy bolt-on install
  • Wind deflector to minimize annoying wind noise issues
  • All 3/16 Aluminum construction to avoid any rust
  • Low profile to fit in garages and more
  • Offer the ability to remove the front and middle MIC hardtop panels
  • Half-rack will mount to the rearmost portion of the MIC hardtop and will not exceed past the middle panel

    TrailRax, Inc. Limited Lifetime Warranty Policy

    TrailRax, Inc. offers a Limited Lifetime Warranty on all TrailRax products. By placing an order, you understand that it constitutes your understanding and acceptance of this policy.

    1. Warranty Duration and Scope

    • This Limited Lifetime Warranty remains in effect for the duration the original retail purchaser owns the product and it is installed on the original vehicle. This warranty is NON-TRANSFERRABLE.

    A. Covered Defects

    This warranty is limited to product failure under normal operating conditions and covers:

    • Defects in materials used to manufacture our products.

    • Defects in workmanship.

    • Broken components deemed to have structurally failed under proper installation, necessary components for weight bearing, and normal use. Specifically, this warranty covers the structural failure of load-bearing components due to material defects or premature breakdown occurring during typical, non-abusive use.

    B. Exclusions (What is Not Covered)

    This warranty does not cover the following:

    • Finish/Cosmetic Damage: Any chips, scratches, fading, rust, or flaking to the finish or powder-coating.

    • External Damage: Defects or damage resulting from accidents, acts of nature, vehicle collisions, or trail damage.

    • Abuse & Misuse: Defects caused by competition/racing, overloading beyond the product's rated capacity, or poor maintenance practices.

    • Improper Use: Damage resulting from incorrect assembly, incorrect load bearing pieces, or installation, including, but not limited to, cross-threading hardware.

    • Third-Party Products: Defects or damage to products manufactured by other vendors and sold through TrailRax, Inc.

    2. Remedy and Claims Process

    If a covered defect is discovered, TrailRax will, at its sole discretion, repair or replace the product with a new or reconditioned product at no charge to you, provided the product is returned during the warranty period.

    A. Warranty Claim Procedure

    Prior to returning any product, you must obtain a Return Merchandise Authorization Number (RMA#) by contacting TrailRax at the address or phone number provided below.

    The original purchaser is responsible for shipping expenses to return the product to TrailRax. 

    385-777-2601

    1654 W 1250 S, Unit 2

    Woods Cross, Utah 84087

     

    B. Shipping and Return

    If the repairs are covered by this warranty and the product was properly shipped to TrailRax, TrailRax will pay the return shipping charges back to the customer (domestic addresses only).

    To expedite your warranty claim, please ensure your return package includes:

    • The assigned RMA # (clearly marked on the outside of the box).

    • A copy of the Original Proof of Purchase.

    • Your current name, address, and telephone number.

    • A detailed description of the defect/problem for which service is requested.

    • The product must be properly packaged to prevent damage during transit.

    3. Warranty Void Actions

    TRAILRAX HAS THE RIGHT TO REFUSE/VOID A WARRANTY if the product falls under any of the following conditions. Products with voided warranties will not be eligible for exchange, refund, or warranty consideration.

    • Non-Authorized Purchase: The product was not purchased directly from TrailRax or an authorized TrailRax retailer or distributor.

    • Lack of Documentation: Valid Proof of Purchase cannot be provided.

    • Unauthorized Modification: The product or its installation was modified, changed, altered, or customized in any way from its original design.

    • Improper Application: Installation of the product on the wrong vehicle or model, or reinstallation of the product on an alternate vehicle.

    4. Limitation of Liability

    Replacement of a defective product or the issuance of a credit/refund (as determined by TrailRax) is the purchaser’s exclusive remedy under this warranty.

    TrailRax cannot be held financially responsible for any labor associated with the installation or removal of our products.

    TrailRax, Inc. is not liable for any consequential, incidental, or special damages, including, but not limited to, any damage to the purchaser's vehicle, cargo, or any other person or property that results from the use or failure of a TrailRax product.

     

    This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

    Key Features:

    • Overall height added to your Bronco- 3.845" from the center of the hardtop or 3.345" from the highest point of the hardtop (outer edges).
    • Static load rating for half-rack: 300 lbs evenly distributed across the rack
    • Dynamic load rating for half-rack: 150 lbs evenly distributed across the rack
      • These ratings are rated and measured WITH optioned Pak Rax. The Pak Rax allows for the distribution of weight to the body of the Bronco allowing the best stability and carrying load capacity.
    • Easy bolt-on rack install
    • Wind deflector to minimize wind noise
    • Cutouts for high-performance off-road lights
    • All aluminum construction to avoid rust and corrosion
    • Patented Pak Rax option to increase storage capabilities
    • Offer the ability to remove the front and middle MIC hardtop panels
    • Half-rack will mount to the rearmost portion of the MIC hardtop and will not exceed past the middle panel

    The TrailRax Ford Bronco Half-Rack is engineered for Bronco owners seeking durability, versatility, and modular functionality. Constructed from 5052 3/16" aluminum, the one-piece side panels provide extreme rigidity, a 90-degree bent channel, and mounting flexibility for gear, tools, and accessories.

    Precision anodized black aluminum extrusions, made locally in Utah, deliver high stress and deflection ratings for maximum load capacity. Crossmember cutouts and pre-slotted side panels allow easy accessory installation and customization.

    The clamping mounting system secures to the OEM Ford hardtop, with front rails bolting into existing windshield studs for added stability. The Pak Rax mounts directly to the side panels, distributing weight to reduce stress on the MIC hardtop while increasing capacity.

    This modular roof rack is ideal for overlanders, desert racers, and off-road enthusiasts, with the ability to upgrade or expand as your adventures grow. MIC hardtop required.

    Brand's and Products recommend using with our TRMR Rack:

    While you are not limited to these brands, these brands worked with us along the way in designing the rack. This gives us and them the ability to work with their products within the design to make sure everything fits properly and works together in harmony. If you are looking to accessorize your TRMR Rack, look no further than these brands if you want high-quality products that fit directly to your TRMR Rack with no headaches. 

    Hit this link!

    Ford rates the Bronco roof with a factory rack at "Max load 110 lbs dynamic and 450 lbs static evenly distributed." All these weights will be at your discretion as they are above Ford's "recommended" capacities. We build our rack to be capable on its own of withstanding 300 lbs static, and 150 lbs dynamic. GVWR and other factors such as roof materials, the center of gravity, and wind dynamics all apply to any load you put on top of a vehicle, and you, as the user, are responsible for the safe loading and operation of your vehicle. Please review your Owner's Manual to review your recommended payloads for your Bronco. If you need more information please contact us at info@TrailRax.com.

    Our 90 degree bend

    We added a bend into our 5052 Aluminum side panels to drastically increase durability and strength. This helps us achieve the highest rated rack for its low profile. This bend also offers full 360 degree mounting area on the rack, you are now not limited to where your TSLOTS are mounted.

    For the weekend warrior

    The Modular Half Rack offers an open front end that allows you to still experience an open air experience with your removable panels while still allowing to carry your stuff in the back.

    Our Integrated Pak Rax option

    Our Pak Rax option is a patented specialty of ours that we designed to be an additional storage solution. In this case with the Bronco, It actually allows for a higher load capacity than factory ratings. The Pak Rax adds more stability and weight load because it distributes weight to the body of the Bronco putting less stress on the MIC Hardtop.