Alu-Cab RTT mounting kit
Alu-Cab RTT mounting kit
Alu-Cab RTT mounting kit
Alu-Cab RTT mounting kit
Alu-Cab RTT mounting kit
Alu-Cab RTT mounting kit

Alu-Cab RTT mounting kit

TR-ACMK-WLB


  • Low stock - 3 items left
  • Backordered, shipping soon
Load Bars included?
Sale price$989.99
/
Shipping calculated at checkout.

*Racks in photos are not included. 

kit contents: 6x 1" HD Tent mounts, GP Factor offset rear and center mounts, 2x GP Factor Lopro Alucab Mounts, and all hardware needed to mount to your extrusion rack. If optioned "yes" you will also receive 3x Alu-Cab Load bars.

NOTE - PAK RAX REQUIRED TO MOUNT ALU-CAB TENTS DUE TO WEIGHT

TrailRax, Inc. Limited Lifetime Warranty Policy

TrailRax, Inc. offers a Limited Lifetime Warranty on all TrailRax products. By placing an order, you understand that it constitutes your understanding and acceptance of this policy.

1. Warranty Duration and Scope

  • This Limited Lifetime Warranty remains in effect for the duration the original retail purchaser owns the product and it is installed on the original vehicle. This warranty is NON-TRANSFERRABLE.

A. Covered Defects

This warranty is limited to product failure under normal operating conditions and covers:

  • Defects in materials used to manufacture our products.

  • Defects in workmanship.

  • Broken components deemed to have structurally failed under proper installation, necessary components for weight bearing, and normal use. Specifically, this warranty covers the structural failure of load-bearing components due to material defects or premature breakdown occurring during typical, non-abusive use.

B. Exclusions (What is Not Covered)

This warranty does not cover the following:

  • Finish/Cosmetic Damage: Any chips, scratches, fading, rust, or flaking to the finish or powder-coating.

  • External Damage: Defects or damage resulting from accidents, acts of nature, vehicle collisions, or trail damage.

  • Abuse & Misuse: Defects caused by competition/racing, overloading beyond the product's rated capacity, or poor maintenance practices.

  • Improper Use: Damage resulting from incorrect assembly, incorrect load bearing pieces, or installation, including, but not limited to, cross-threading hardware.

  • Third-Party Products: Defects or damage to products manufactured by other vendors and sold through TrailRax, Inc.

2. Remedy and Claims Process

If a covered defect is discovered, TrailRax will, at its sole discretion, repair or replace the product with a new or reconditioned product at no charge to you, provided the product is returned during the warranty period.

A. Warranty Claim Procedure

Prior to returning any product, you must obtain a Return Merchandise Authorization Number (RMA#) by contacting TrailRax at the address or phone number provided below.

The original purchaser is responsible for shipping expenses to return the product to TrailRax. 

385-777-2601

1654 W 1250 S, Unit 2

Woods Cross, Utah 84087

 

B. Shipping and Return

If the repairs are covered by this warranty and the product was properly shipped to TrailRax, TrailRax will pay the return shipping charges back to the customer (domestic addresses only).

To expedite your warranty claim, please ensure your return package includes:

  • The assigned RMA # (clearly marked on the outside of the box).

  • A copy of the Original Proof of Purchase.

  • Your current name, address, and telephone number.

  • A detailed description of the defect/problem for which service is requested.

  • The product must be properly packaged to prevent damage during transit.

3. Warranty Void Actions

TRAILRAX HAS THE RIGHT TO REFUSE/VOID A WARRANTY if the product falls under any of the following conditions. Products with voided warranties will not be eligible for exchange, refund, or warranty consideration.

  • Non-Authorized Purchase: The product was not purchased directly from TrailRax or an authorized TrailRax retailer or distributor.

  • Lack of Documentation: Valid Proof of Purchase cannot be provided.

  • Unauthorized Modification: The product or its installation was modified, changed, altered, or customized in any way from its original design.

  • Improper Application: Installation of the product on the wrong vehicle or model, or reinstallation of the product on an alternate vehicle.

4. Limitation of Liability

Replacement of a defective product or the issuance of a credit/refund (as determined by TrailRax) is the purchaser’s exclusive remedy under this warranty.

TrailRax cannot be held financially responsible for any labor associated with the installation or removal of our products.

TrailRax, Inc. is not liable for any consequential, incidental, or special damages, including, but not limited to, any damage to the purchaser's vehicle, cargo, or any other person or property that results from the use or failure of a TrailRax product.

 

In Stock Ready To Ship

 

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Mount your Alu-Cab 3.1 or 3R Roof Top Tent securely and effortlessly with this all-in-one TrailRax mounting kit. Designed for heavier, larger Alu-Cab RTTs, it provides full structural support for a safe and balanced setup on your TrailRax Modular Roof Rack or other extrusion-style racks with proper crossbar spacing.

This comprehensive kit includes:

  • 6x HD Tent Mounts

  • GP Factor Offset Tent Mount Kit (rear and center)

  • 2x GP Factor Lopro Alu-Cab Mounts

  • All necessary hardware

  • Optional: 3x Alu-Cab Load Bars

Everything is designed for easy installation and a secure, drop-on fit, bringing together the highest-quality components for a reliable, adventure-ready setup.

Note: Pak Rax required for Bronco TRMR Racks due to tent weight. Racks not included.

For those of you who have a different extrusion-based rack, no need to worry; this kit will work with your rack as well, with the correct crossbar spacing! 

Everything needed in one package!

Everything you need, nothing you don't. Mount your Alu-Cab 3R on our TrailRax modular roof racks or other extrusion based racks with the exact hardware and parts needed in one place. Everything is ready to go and easy to bolt on your extrusion based racks.

perfect engineering

Our team worked closely with GP Factor and OK4WD/ Alu-Cab USA to create this amazing, All-in-one kit for mounting Alu-Cab RTTs on our TrailRax Modular Roof Racks or extrusion based racks.

Low profile design

While our kit is made for the best structural integrity and stability, we still accomplished a low profile design for the customer.