Universal MaxTrax LITE Plate
Universal MaxTrax LITE Plate
Universal MaxTrax LITE Plate
Universal MaxTrax LITE Plate
Universal MaxTrax LITE Plate
Universal MaxTrax LITE Plate

Universal MaxTrax LITE Plate

TR-ACC-MLP


  • In stock, ready to ship
  • Backordered, shipping soon
Regular price$139.99
/
Shipping calculated at checkout.
  • Comes powder coated satin black
  • Accomplishes 56% lighter plate than our Universal MaxTrax (MKii & Xtreme) Plate
  • 1/8th inch 5052 Aluminum
  • Easy to install and switch out with our universal plates or mount on our TRMR Rack!

What's in the box?

  • Universal MaxTrax Lite Plate
  • 4x 1/4"-20x5/8" Stainless steel hardware
  • 8x 1/4" washers
  • 4x 1/4"-20 Nylon nuts

TrailRax, Inc. Limited Lifetime Warranty Policy

TrailRax, Inc. offers a Limited Lifetime Warranty on all TrailRax products. By placing an order, you understand that it constitutes your understanding and acceptance of this policy.

1. Warranty Duration and Scope

  • This Limited Lifetime Warranty remains in effect for the duration the original retail purchaser owns the product and it is installed on the original vehicle. This warranty is NON-TRANSFERRABLE.

A. Covered Defects

This warranty is limited to product failure under normal operating conditions and covers:

  • Defects in materials used to manufacture our products.

  • Defects in workmanship.

  • Broken components deemed to have structurally failed under proper installation, necessary components for weight bearing, and normal use. Specifically, this warranty covers the structural failure of load-bearing components due to material defects or premature breakdown occurring during typical, non-abusive use.

B. Exclusions (What is Not Covered)

This warranty does not cover the following:

  • Finish/Cosmetic Damage: Any chips, scratches, fading, rust, or flaking to the finish or powder-coating.

  • External Damage: Defects or damage resulting from accidents, acts of nature, vehicle collisions, or trail damage.

  • Abuse & Misuse: Defects caused by competition/racing, overloading beyond the product's rated capacity, or poor maintenance practices.

  • Improper Use: Damage resulting from incorrect assembly, incorrect load bearing pieces, or installation, including, but not limited to, cross-threading hardware.

  • Third-Party Products: Defects or damage to products manufactured by other vendors and sold through TrailRax, Inc.

2. Remedy and Claims Process

If a covered defect is discovered, TrailRax will, at its sole discretion, repair or replace the product with a new or reconditioned product at no charge to you, provided the product is returned during the warranty period.

A. Warranty Claim Procedure

Prior to returning any product, you must obtain a Return Merchandise Authorization Number (RMA#) by contacting TrailRax at the address or phone number provided below.

The original purchaser is responsible for shipping expenses to return the product to TrailRax. 

385-777-2601

1654 W 1250 S, Unit 2

Woods Cross, Utah 84087

 

B. Shipping and Return

If the repairs are covered by this warranty and the product was properly shipped to TrailRax, TrailRax will pay the return shipping charges back to the customer (domestic addresses only).

To expedite your warranty claim, please ensure your return package includes:

  • The assigned RMA # (clearly marked on the outside of the box).

  • A copy of the Original Proof of Purchase.

  • Your current name, address, and telephone number.

  • A detailed description of the defect/problem for which service is requested.

  • The product must be properly packaged to prevent damage during transit.

3. Warranty Void Actions

TRAILRAX HAS THE RIGHT TO REFUSE/VOID A WARRANTY if the product falls under any of the following conditions. Products with voided warranties will not be eligible for exchange, refund, or warranty consideration.

  • Non-Authorized Purchase: The product was not purchased directly from TrailRax or an authorized TrailRax retailer or distributor.

  • Lack of Documentation: Valid Proof of Purchase cannot be provided.

  • Unauthorized Modification: The product or its installation was modified, changed, altered, or customized in any way from its original design.

  • Improper Application: Installation of the product on the wrong vehicle or model, or reinstallation of the product on an alternate vehicle.

4. Limitation of Liability

Replacement of a defective product or the issuance of a credit/refund (as determined by TrailRax) is the purchaser’s exclusive remedy under this warranty.

TrailRax cannot be held financially responsible for any labor associated with the installation or removal of our products.

TrailRax, Inc. is not liable for any consequential, incidental, or special damages, including, but not limited to, any damage to the purchaser's vehicle, cargo, or any other person or property that results from the use or failure of a TrailRax product.

 

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

The addition of the MaxTrax LITEs to the MaxTrax family of recovery boards has been a gift to those who run Pak Rax on their rig! These traction boards offer the same reliability and strength you can expect from MaxTrax while delivering 48% lighter at 3.9 lbs (about half of the MK2's), smaller footprint which is super beneficial to mounting, and an affordable price! All these aspects have been great to implement into the TrailRax Modular Roof Rack and Pak Rax designs! 

We took the awesome strength of our Universal MaxTrax Plate and applied it to fit the MaxTrax LITE plate with similar goals. In comes the Universal MaxTrax LITE Plate which carries the same mounting universitility as our Universal MaxTrax Plate but made it lighter, just as strong, and more affordable just like the MaxTrax LITEs! Made of 5052 Aluminum 1/8th inch thick plate with additional bends for strength and a nice satin powder coat finish, this MaxTrax Lite plate can be mounted just about anywhere in our TrailRax ecosystem of products. You can mount it on your TRMR Rack latitude or longitude or move it to your Pak Rax and if you want to get really creative, you can mount it on our 90 degree brackets. There are so many mounting options for this plate that it has earned the universal name! This plate is also capable of being mounted on other similar 80/20 based racks and much more.

With this new size of plate, this MaxTrax Lite plate and Lite Traction board mount works perfect for 4 door model SUVs as most rear windows are too small for standard MKiis or Xtreme plates which in turn requires you to slide the mkiis and Xtreme plates to hang off the rear, some may not like the look of that. This is where the Lites come in nicely, they fit perfectly on Bronco 4 Door models and Jeep wrangler 4 door models. For 2 doors, we highly recommend taking advantage of the whole space you are given and get the MKiis or Xtremes for your build.

This mount comes powder coated and ready to mount!

  • Comes powder coated satin black
  • Accomplishes 56% lighter plate than our Universal MaxTrax (MKii & Xtreme) Plate
  • 1/8th inch 5052 Aluminum
  • Easy to install and switch out with our universal plates or mount on our TRMR Rack!

 

Great fit for SUVs with Pak Rax!

The Maxtrax Lite Plate allows for plenty of adjustability but also the unit is short enough to fit on most rear windows without blocking the rear passenger door or hanging off the rear of the vehicle.

Easy to mount and easy to access

The Maxtrax Lite Plate offers the ability to be mounted to our Pak rax models or our TRMR Racks giving you the freedom of how easy to access you want to have to your Maxtrax Lites for recovery situations or leveling your vehicle at camp.

Lighter just like the Maxtrax lites!

When Maxtrax released the new Maxtrax lites, they boasted a 48% lighter weight profile, we decided to focus on the same mission. We accomplished to shave off 56% of the weight from our Universal Recovery board plate, but still continue to have extreme durability and strength that you know and love from TrailRax and Maxtrax