TrailRax Table Slide
TrailRax Table Slide
TrailRax Table Slide
TrailRax Table Slide
TrailRax Table Slide
TrailRax Table Slide
TrailRax Table Slide
TrailRax Table Slide

TrailRax Table Slide

TR-TS


  • In stock, ready to ship
  • Backordered, shipping soon
Mounting kit
Sale price$219.99
/
Shipping calculated at checkout.

Specs:

  • Slimmest profile on the market: 1.49" in height allowing it to be mounted under low profile roof racks
  • multiple mounting kits available for different products on the market: TRMR Rack or similar mounting kit and Leitner bed rack mounting kit and more coming soon.
  • Made in Utah, USA
  • Designed around the Alu-cab table because of its ease of availability and low profile

TrailRax, Inc. Limited Lifetime Warranty Policy

TrailRax, Inc. offers a Limited Lifetime Warranty on all TrailRax products. By placing an order, you understand that it constitutes your understanding and acceptance of this policy.

1. Warranty Duration and Scope

  • This Limited Lifetime Warranty remains in effect for the duration the original retail purchaser owns the product and it is installed on the original vehicle. This warranty is NON-TRANSFERRABLE.

A. Covered Defects

This warranty is limited to product failure under normal operating conditions and covers:

  • Defects in materials used to manufacture our products.

  • Defects in workmanship.

  • Broken components deemed to have structurally failed under proper installation, necessary components for weight bearing, and normal use. Specifically, this warranty covers the structural failure of load-bearing components due to material defects or premature breakdown occurring during typical, non-abusive use.

B. Exclusions (What is Not Covered)

This warranty does not cover the following:

  • Finish/Cosmetic Damage: Any chips, scratches, fading, rust, or flaking to the finish or powder-coating.

  • External Damage: Defects or damage resulting from accidents, acts of nature, vehicle collisions, or trail damage.

  • Abuse & Misuse: Defects caused by competition/racing, overloading beyond the product's rated capacity, or poor maintenance practices.

  • Improper Use: Damage resulting from incorrect assembly, incorrect load bearing pieces, or installation, including, but not limited to, cross-threading hardware.

  • Third-Party Products: Defects or damage to products manufactured by other vendors and sold through TrailRax, Inc.

2. Remedy and Claims Process

If a covered defect is discovered, TrailRax will, at its sole discretion, repair or replace the product with a new or reconditioned product at no charge to you, provided the product is returned during the warranty period.

A. Warranty Claim Procedure

Prior to returning any product, you must obtain a Return Merchandise Authorization Number (RMA#) by contacting TrailRax at the address or phone number provided below.

The original purchaser is responsible for shipping expenses to return the product to TrailRax. 

385-777-2601

1654 W 1250 S, Unit 2

Woods Cross, Utah 84087

 

B. Shipping and Return

If the repairs are covered by this warranty and the product was properly shipped to TrailRax, TrailRax will pay the return shipping charges back to the customer (domestic addresses only).

To expedite your warranty claim, please ensure your return package includes:

  • The assigned RMA # (clearly marked on the outside of the box).

  • A copy of the Original Proof of Purchase.

  • Your current name, address, and telephone number.

  • A detailed description of the defect/problem for which service is requested.

  • The product must be properly packaged to prevent damage during transit.

3. Warranty Void Actions

TRAILRAX HAS THE RIGHT TO REFUSE/VOID A WARRANTY if the product falls under any of the following conditions. Products with voided warranties will not be eligible for exchange, refund, or warranty consideration.

  • Non-Authorized Purchase: The product was not purchased directly from TrailRax or an authorized TrailRax retailer or distributor.

  • Lack of Documentation: Valid Proof of Purchase cannot be provided.

  • Unauthorized Modification: The product or its installation was modified, changed, altered, or customized in any way from its original design.

  • Improper Application: Installation of the product on the wrong vehicle or model, or reinstallation of the product on an alternate vehicle.

4. Limitation of Liability

Replacement of a defective product or the issuance of a credit/refund (as determined by TrailRax) is the purchaser’s exclusive remedy under this warranty.

TrailRax cannot be held financially responsible for any labor associated with the installation or removal of our products.

TrailRax, Inc. is not liable for any consequential, incidental, or special damages, including, but not limited to, any damage to the purchaser's vehicle, cargo, or any other person or property that results from the use or failure of a TrailRax product.

 

Shipping Now!

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Introducing the TrailRax Table Slide, the industry-leading solution for storing and deploying your Alu-Cab 3.1 or 3R table under your TrailRax Modular Roof Rack or similar extrusion-style racks. Made in Utah, USA, this innovative slide boasts the slimmest profile on the market at just 1.49", letting you utilize previously unused space for a full 4x2 ft table without sacrificing trunk space or gear accessibility.

After years of experience in the overland and off-road space, we designed this table slide to be first out, last in, so you can deploy your table before unloading gear and stow it quickly without playing "storage tetris." The 1.49" profile is made possible using TSLOT aluminum extrusions by Bonnell Aluminum, giving you a patent-pending, precision-engineered design compatible with most racks.

Why Alu-Cab?
We chose the Alu-Cab table for its worldwide availability, affordability, and consistent quality, making it easy to source locally and ship efficiently.

Compatibility & Mounting:

  • Fits most TrailRax Modular Roof Racks and similar extrusion-style racks

  • Measure from your vehicle’s roof crown to the bottom of the extrusion — minimum 1.6" clearance required

  • Mounting kits available for TRMR racks, Leitner bed racks, and custom setups

  • Optional kits allow for a universal drop-on installation

Specs & Features:

  • 1.49" ultra-slim profile for low-profile roof racks

  • Compatible with Alu-Cab tables (easy worldwide sourcing)

  • Multiple mounting options for various racks and future updates

Maximize your overland setup with a secure, accessible, and space-saving under-rack table solution that’s ready for any adventure.

Slimmest profile on the market!

Our profile is only 1.490" making it the industry leading slimmest profile on the market. This opens the opportunity to mount a table in what is normally unused space and bring value to those who have storage space a big priority.

First out, last in

This has become our motto with this product! For once you can now get your table out when you need it, without digging through your gear in your trunk to get to it. When it comes to packing up, the table can now be last to put away so you do not need to put your gear in the dirt to put the table away first. If you have been there, you know what we mean!

Made in Utah, USA

The TrailRax Table Slide assembly is made in our beautiful home state of Utah. The profile extrusions all the way to the cardboard it comes in are sourced in our home state of Utah.