Trail Sight Accessory Mount
Trail Sight Accessory Mount
Trail Sight Accessory Mount

Trail Sight Accessory Mount

TR-FB-TSAM


  • In stock, ready to ship
  • Backordered, shipping soon
Regular price$29.99
/
Shipping calculated at checkout.

Comes powder-coated satin black

  • Easy to install, uses existing female bolts

  • Works with HAM, GMRS, and VHF/UHF antennas

  • Accessory hole measures 10mm
  • Still allows the use of tie-down straps on the Trail Sights

  • Powder-coated satin black

TrailRax, Inc. Limited Lifetime Warranty Policy

TrailRax, Inc. offers a Limited Lifetime Warranty on all TrailRax products. By placing an order, you understand that it constitutes your understanding and acceptance of this policy.

1. Warranty Duration and Scope

  • This Limited Lifetime Warranty remains in effect for the duration the original retail purchaser owns the product and it is installed on the original vehicle. This warranty is NON-TRANSFERRABLE.

A. Covered Defects

This warranty is limited to product failure under normal operating conditions and covers:

  • Defects in materials used to manufacture our products.

  • Defects in workmanship.

  • Broken components deemed to have structurally failed under proper installation, necessary components for weight bearing, and normal use. Specifically, this warranty covers the structural failure of load-bearing components due to material defects or premature breakdown occurring during typical, non-abusive use.

B. Exclusions (What is Not Covered)

This warranty does not cover the following:

  • Finish/Cosmetic Damage: Any chips, scratches, fading, rust, or flaking to the finish or powder-coating.

  • External Damage: Defects or damage resulting from accidents, acts of nature, vehicle collisions, or trail damage.

  • Abuse & Misuse: Defects caused by competition/racing, overloading beyond the product's rated capacity, or poor maintenance practices.

  • Improper Use: Damage resulting from incorrect assembly, incorrect load bearing pieces, or installation, including, but not limited to, cross-threading hardware.

  • Third-Party Products: Defects or damage to products manufactured by other vendors and sold through TrailRax, Inc.

2. Remedy and Claims Process

If a covered defect is discovered, TrailRax will, at its sole discretion, repair or replace the product with a new or reconditioned product at no charge to you, provided the product is returned during the warranty period.

A. Warranty Claim Procedure

Prior to returning any product, you must obtain a Return Merchandise Authorization Number (RMA#) by contacting TrailRax at the address or phone number provided below.

The original purchaser is responsible for shipping expenses to return the product to TrailRax. 

385-777-2601

1654 W 1250 S, Unit 2

Woods Cross, Utah 84087

 

B. Shipping and Return

If the repairs are covered by this warranty and the product was properly shipped to TrailRax, TrailRax will pay the return shipping charges back to the customer (domestic addresses only).

To expedite your warranty claim, please ensure your return package includes:

  • The assigned RMA # (clearly marked on the outside of the box).

  • A copy of the Original Proof of Purchase.

  • Your current name, address, and telephone number.

  • A detailed description of the defect/problem for which service is requested.

  • The product must be properly packaged to prevent damage during transit.

3. Warranty Void Actions

TRAILRAX HAS THE RIGHT TO REFUSE/VOID A WARRANTY if the product falls under any of the following conditions. Products with voided warranties will not be eligible for exchange, refund, or warranty consideration.

  • Non-Authorized Purchase: The product was not purchased directly from TrailRax or an authorized TrailRax retailer or distributor.

  • Lack of Documentation: Valid Proof of Purchase cannot be provided.

  • Unauthorized Modification: The product or its installation was modified, changed, altered, or customized in any way from its original design.

  • Improper Application: Installation of the product on the wrong vehicle or model, or reinstallation of the product on an alternate vehicle.

4. Limitation of Liability

Replacement of a defective product or the issuance of a credit/refund (as determined by TrailRax) is the purchaser’s exclusive remedy under this warranty.

TrailRax cannot be held financially responsible for any labor associated with the installation or removal of our products.

TrailRax, Inc. is not liable for any consequential, incidental, or special damages, including, but not limited to, any damage to the purchaser's vehicle, cargo, or any other person or property that results from the use or failure of a TrailRax product.

 

In stock and ready to ship

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Having trouble finding where to mount your antenna or other accessories for your New Ford Bronco? We solved that! Now you can mount your Antennas, GoPros, lights, and more to your 2021+ Bronco! The Trail Sight Accessory Mount or TSAM allows you to mount your accessories on the Trail Sights of your Ford Bronco. This gives the end-user the ability to watch an antenna to make sure no brush or branches knock the antenna and lose communication. This also keeps it far away from the radio in the vehicle to allow for little to no interference. It will also give a dynamic angle with a GoPro while you are offroad. Lights are also a possibility giving you another area to mount a pod to make sure you light up the night. This is a quick installation and easy-to-use product, only requiring 2 bolts to mount.

 The TSAM will also work with the tie-down mount on the Trail Sights, we engineered it to allow for clearance of a tie-down strap. This mount is also not limited to just an antenna mount, it can be used to mount extra pod lights and other accessories you would need at the front of your Bronco.

Comes powder-coated satin black

  • Easy to install, uses existing female bolts

  • Works with HAM, GMRS, and VHF/UHF antennas

  • Accessory hole measures 10mm
  • Still allows the use of tie-down straps on the Trail Sights

  • Powder-coated satin black

What comes in the Box?

  • TrailRax Trail Sight Accessory Mount for the Ford Bronco 2021+
  • 2x M6x1.0 16mm bolts
  • 4x washers

great little mount

Our Trail Sight Accessory mount offers a great place to mount your tools and accessories in a small place that Ford offers as an accessory location!

Keep an eye on your accessories

Be able to keep an eye on your antennas to know your clearances with your Bronco. This way you do not have any interruptions while communicating with your crew on the trails.

Mount any kind of antenna

Just about any antenna model is ready to go on this Trail Sight Accessory mount!