HD Bronco 270 Full Set Up

HD Bronco 270 Full Set Up

TR-FB-BDL-TAB-270-HD-1


  • In stock, ready to ship
  • Backordered, shipping soon
Awning Side
Billet Brace Finish
Regular price$783.99
/
Shipping calculated at checkout.

HD Bronco 270 Full Set Up Includes:
2 Modular Roof Rack 90 Degree Brackets
1 270 Degree Awning Bracket
2 Powdered Billet Braces
6 HD Tent Mounts With 1.5" Rise

TrailRax, Inc. Limited Lifetime Warranty Policy

TrailRax, Inc. offers a Limited Lifetime Warranty on all TrailRax products. By placing an order, you understand that it constitutes your understanding and acceptance of this policy.

1. Warranty Duration and Scope

  • This Limited Lifetime Warranty remains in effect for the duration the original retail purchaser owns the product and it is installed on the original vehicle. This warranty is NON-TRANSFERRABLE.

A. Covered Defects

This warranty is limited to product failure under normal operating conditions and covers:

  • Defects in materials used to manufacture our products.

  • Defects in workmanship.

  • Broken components deemed to have structurally failed under proper installation, necessary components for weight bearing, and normal use. Specifically, this warranty covers the structural failure of load-bearing components due to material defects or premature breakdown occurring during typical, non-abusive use.

B. Exclusions (What is Not Covered)

This warranty does not cover the following:

  • Finish/Cosmetic Damage: Any chips, scratches, fading, rust, or flaking to the finish or powder-coating.

  • External Damage: Defects or damage resulting from accidents, acts of nature, vehicle collisions, or trail damage.

  • Abuse & Misuse: Defects caused by competition/racing, overloading beyond the product's rated capacity, or poor maintenance practices.

  • Improper Use: Damage resulting from incorrect assembly, incorrect load bearing pieces, or installation, including, but not limited to, cross-threading hardware.

  • Third-Party Products: Defects or damage to products manufactured by other vendors and sold through TrailRax, Inc.

2. Remedy and Claims Process

If a covered defect is discovered, TrailRax will, at its sole discretion, repair or replace the product with a new or reconditioned product at no charge to you, provided the product is returned during the warranty period.

A. Warranty Claim Procedure

Prior to returning any product, you must obtain a Return Merchandise Authorization Number (RMA#) by contacting TrailRax at the address or phone number provided below.

The original purchaser is responsible for shipping expenses to return the product to TrailRax. 

385-777-2601

1654 W 1250 S, Unit 2

Woods Cross, Utah 84087

 

B. Shipping and Return

If the repairs are covered by this warranty and the product was properly shipped to TrailRax, TrailRax will pay the return shipping charges back to the customer (domestic addresses only).

To expedite your warranty claim, please ensure your return package includes:

  • The assigned RMA # (clearly marked on the outside of the box).

  • A copy of the Original Proof of Purchase.

  • Your current name, address, and telephone number.

  • A detailed description of the defect/problem for which service is requested.

  • The product must be properly packaged to prevent damage during transit.

3. Warranty Void Actions

TRAILRAX HAS THE RIGHT TO REFUSE/VOID A WARRANTY if the product falls under any of the following conditions. Products with voided warranties will not be eligible for exchange, refund, or warranty consideration.

  • Non-Authorized Purchase: The product was not purchased directly from TrailRax or an authorized TrailRax retailer or distributor.

  • Lack of Documentation: Valid Proof of Purchase cannot be provided.

  • Unauthorized Modification: The product or its installation was modified, changed, altered, or customized in any way from its original design.

  • Improper Application: Installation of the product on the wrong vehicle or model, or reinstallation of the product on an alternate vehicle.

4. Limitation of Liability

Replacement of a defective product or the issuance of a credit/refund (as determined by TrailRax) is the purchaser’s exclusive remedy under this warranty.

TrailRax cannot be held financially responsible for any labor associated with the installation or removal of our products.

TrailRax, Inc. is not liable for any consequential, incidental, or special damages, including, but not limited to, any damage to the purchaser's vehicle, cargo, or any other person or property that results from the use or failure of a TrailRax product.

 

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

HD Bronco 270 Full Set Up Includes:
2 Modular Roof Rack 90 Degree Brackets
1 270 Degree Awning Bracket
2 Billet Braces
6 HD Tent Mounts With 1.5" Rise

Fits the TrailRax Modular Roof Rack for the Bronco 2 Door, 4 Door, and Sport. TrailRax Bronco Bundles are also compatible with most top roof rack brands. Contact our team for compatibility questions.

Built for Bronco overlanding adventures, the Heavy Duty 270 Full Set Up gives unmatched strength and stability for mounting your 270-degree awning and rooftop tent. Engineered from heavy-duty 5052 aluminum and reinforced with billet braces, this all-in-one Bronco kit ensures your rig is ready for rugged trails and outdoor exploration.

This kit is for larger tents: Equal to or more than 171 lbs. The 6 Pack HD Tent Mount Kit is only compatible with a rack that is 72" Long. Your tent also must be 72" or longer for the 6 Pack! 

Compatible Tent Brands: Roam Adventure Co, 23Zero, Alu-Cab, Ikamper, GFC, 4x4 Colorado, Intrepid, Freespirit, Inspired Overland, CVT, OVS, Eezi Awn

Compatible Awnings Brands: Alu-Cab, Adventure Roam Co, Kinsman, Hardware, Ikamper, 23Zero,  Freespirit, OVS, Eezi Awn.

See complete list of compatible products

90 and 270 Degree Brackets

With the use of 5052 aluminum, it provides a reliable foundation to create a stable platform for your awning. Through our testing of this material, 5052 aluminum provides the best overall support, durability, and weight-savings.

Powdered Billet Braces

This product was engineered for Bronco users who like to drive spiritually offroad and those who carry large tents or heavy gear on the roof rack. Built from 6061 1/4 aluminum, we machine out a super beefy product with elegant designed chamfers to give a great look while also functioning as needed.

HD Tent Mounts With 1.5" Rise

This versatile mount is also compatible with a variety of other roof racks, making it a must-have for every adventurer seeking ultimate convenience. Unlike standard one-crossbar tent mounts, our HD Tent Mount With 1.5" Rise mounts to two TSLOT cross members on our rack, effectively triangulating the weight load from your tent. Crafted from heavy-duty 3/16 5052 aluminum, our HD Tent Mount With 1.5" Rise offers unrivaled strength and weight distribution, ensuring your tent stays firmly in place, even on the most rugged terrains.