Bronco 270 Awning Kit

Bronco 270 Awning Kit

TR-FB-BDL-270-1


  • In stock, ready to ship
  • Backordered, shipping soon
Awning Side
Billet Brace Finish
Regular price$359.99
/
Shipping calculated at checkout.

Bronco Awning Kit Includes:
2 Modular Roof Rack 90 Degree Brackets
1 270 Degree Awning Bracket
2 Powdered Billet Braces

 

TrailRax, Inc. Limited Lifetime Warranty Policy

TrailRax, Inc. offers a Limited Lifetime Warranty on all TrailRax products. By placing an order, you understand that it constitutes your understanding and acceptance of this policy.

1. Warranty Duration and Scope

  • This Limited Lifetime Warranty remains in effect for the duration the original retail purchaser owns the product and it is installed on the original vehicle. This warranty is NON-TRANSFERRABLE.

A. Covered Defects

This warranty is limited to product failure under normal operating conditions and covers:

  • Defects in materials used to manufacture our products.

  • Defects in workmanship.

  • Broken components deemed to have structurally failed under proper installation, necessary components for weight bearing, and normal use. Specifically, this warranty covers the structural failure of load-bearing components due to material defects or premature breakdown occurring during typical, non-abusive use.

B. Exclusions (What is Not Covered)

This warranty does not cover the following:

  • Finish/Cosmetic Damage: Any chips, scratches, fading, rust, or flaking to the finish or powder-coating.

  • External Damage: Defects or damage resulting from accidents, acts of nature, vehicle collisions, or trail damage.

  • Abuse & Misuse: Defects caused by competition/racing, overloading beyond the product's rated capacity, or poor maintenance practices.

  • Improper Use: Damage resulting from incorrect assembly, incorrect load bearing pieces, or installation, including, but not limited to, cross-threading hardware.

  • Third-Party Products: Defects or damage to products manufactured by other vendors and sold through TrailRax, Inc.

2. Remedy and Claims Process

If a covered defect is discovered, TrailRax will, at its sole discretion, repair or replace the product with a new or reconditioned product at no charge to you, provided the product is returned during the warranty period.

A. Warranty Claim Procedure

Prior to returning any product, you must obtain a Return Merchandise Authorization Number (RMA#) by contacting TrailRax at the address or phone number provided below.

The original purchaser is responsible for shipping expenses to return the product to TrailRax. 

385-777-2601

1654 W 1250 S, Unit 2

Woods Cross, Utah 84087

 

B. Shipping and Return

If the repairs are covered by this warranty and the product was properly shipped to TrailRax, TrailRax will pay the return shipping charges back to the customer (domestic addresses only).

To expedite your warranty claim, please ensure your return package includes:

  • The assigned RMA # (clearly marked on the outside of the box).

  • A copy of the Original Proof of Purchase.

  • Your current name, address, and telephone number.

  • A detailed description of the defect/problem for which service is requested.

  • The product must be properly packaged to prevent damage during transit.

3. Warranty Void Actions

TRAILRAX HAS THE RIGHT TO REFUSE/VOID A WARRANTY if the product falls under any of the following conditions. Products with voided warranties will not be eligible for exchange, refund, or warranty consideration.

  • Non-Authorized Purchase: The product was not purchased directly from TrailRax or an authorized TrailRax retailer or distributor.

  • Lack of Documentation: Valid Proof of Purchase cannot be provided.

  • Unauthorized Modification: The product or its installation was modified, changed, altered, or customized in any way from its original design.

  • Improper Application: Installation of the product on the wrong vehicle or model, or reinstallation of the product on an alternate vehicle.

4. Limitation of Liability

Replacement of a defective product or the issuance of a credit/refund (as determined by TrailRax) is the purchaser’s exclusive remedy under this warranty.

TrailRax cannot be held financially responsible for any labor associated with the installation or removal of our products.

TrailRax, Inc. is not liable for any consequential, incidental, or special damages, including, but not limited to, any damage to the purchaser's vehicle, cargo, or any other person or property that results from the use or failure of a TrailRax product.

 

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Bronco 270 Awning Kit Includes:
2 Modular Roof Rack 90 Degree Brackets
2 Powdered Billet Braces
1 270 Degree Awning Bracket
All Required Bracket Mounting Hardware

Compatibility:
Fits the TrailRax Modular Roof Rack for the Bronco 2 Door, 4 door, and Sport. TrailRax Bronco Bundles are also compatible with most top roof rack brands. Contact our team for compatibility questions.

Mount your 270-degree awning with confidence on your Ford Bronco using the TrailRax Bronco Awning Kit. Perfect for overlanding, camping, and off-road adventures, this bundle gives you everything needed in one package to add shade and functionality to your rig. Designed, engineered, and tested in the USA, our heavy-duty roof rack brackets deliver unmatched stability and durability on any trail. Compatible with TrailRax Modular Roof Racks for the Ford Bronco.

Compatible Awnings Brands: Roam, Kinsman, Hardware, Ikamper, 23Zero, Alu-Cab, Freespirit, OVS, Eezi Awn.

See complete list of compatible products

Modular Roof Rack 90 Degree Brackets

Our 90 degree brackets wrap around the strongest part of the rack allowing for great load bearing capabilities. We even include drop in T-nuts for easy installs. Only works on TrailRax Modular Roof Rack. Ability to mount more accessories to the bracket.

270 Degree Awning Bracket

Our 270 awning mount was specifically designed to do the heavy lifting of the 270 awning when open. With the use of 5052 aluminum, it provides a reliable foundation to create a stable platform for your awning. Through our testing of this material, 5052 aluminum provides the best overall support, durability, and weight-savings.

Powdered Billet Braces

This product was engineered for Bronco users who like to drive spiritually offroad and those who carry large tents or heavy gear on the roof rack. Built from 6061 1/4 aluminum, we machine out a super beefy product with elegant designed chamfers to give a great look while also functioning as needed.