TrailRax Modular Roof Rack for the Jeep gladiator
TrailRax Modular Roof Rack for the Jeep gladiator
TrailRax Modular Roof Rack for the Jeep gladiator
TrailRax Modular Roof Rack for the Jeep gladiator
TrailRax Modular Roof Rack for the Jeep gladiator
TrailRax Modular Roof Rack for the Jeep gladiator
TrailRax Modular Roof Rack for the Jeep gladiator
TrailRax Modular Roof Rack for the Jeep gladiator
TrailRax Modular Roof Rack for the Jeep gladiator
TrailRax Modular Roof Rack for the Jeep gladiator
TrailRax Modular Roof Rack for the Jeep gladiator
TrailRax Modular Roof Rack for the Jeep gladiator
TrailRax Modular Roof Rack for the Jeep gladiator
TrailRax Modular Roof Rack for the Jeep gladiator
TrailRax Modular Roof Rack for the Jeep gladiator
TrailRax Modular Roof Rack for the Jeep gladiator
TrailRax Modular Roof Rack for the Jeep gladiator
TrailRax Modular Roof Rack for the Jeep gladiator
TrailRax Modular Roof Rack for the Jeep gladiator
TrailRax Modular Roof Rack for the Jeep gladiator

TrailRax Modular Roof Rack for the Jeep gladiator

TR-JG-MRR-FL


  • Low stock - 4 items left
  • Inventory on the way
Rack Size
Wind Deflector?
Sale price$1,399.99
/
Shipping calculated at checkout.
In stock and ready to ship
  • Fits Jeep Gladiator 2020+ with hard top
  • Overall height added to your Gladiator - 4.3" from the outside edge to the top of the rack or 3.6" from the center of the hardtop to the top of the rack
  • Static load rating of the rack: 400 lbs evenly distributed across the rack
  • Dynamic load rating of the rack: 200 lbs evenly distributed across the rack

TrailRax, Inc. Warranty Policy 

 

TrailRax offers a lifetime limited warranty on all TrailRax products. Warranty is limited to product failure under normal operating conditions. Our lifetime limited warranty covers defects in materials used to manufacture our products,  defects in workmanship, and broken components deemed to have failed under proper installation and normal wear and tear. Due to the nature in which our products are used, TrailRax cannot be  responsible for any chips, scratches, rust or flaking to the finish. Additionally, TrailRax cannot be held financially responsible for any labor associated with installation or removal of our products. The placing of an order constitutes your understanding and acceptance of our Warranty policy.

This warranty does not cover defects caused by normal wear and tear, scratches, accidents, or products used for racing/competition. This warranty does not cover damage to the finish of powder-coated products. TrailRax, Inc. is not responsible for defects that are not in control of TrailRax, Inc. such as trail damage, overloading, incorrect assembly, or poor maintenance practices. TrailRax, Inc. is not responsible for defects or damage to products manufactured by other vendors and sold through TrailRax, Inc.

This  warranty only applies to the original retail purchaser and the original installation of the  product. This warranty is NON-TRANSFERRABLE.  No retailer, reseller, dealer, or agent is authorized to make modifications, extensions,  amendments, or additions to this warranty.

If you discover a defect, TrailRax will, at its option, repair or replace this product with a new or reconditioned product at no charge to you, provided you return it during the warranty period, with transportation charges prepaid, to TrailRax. (You can obtain additional information by contacting TrailRax at the address printed below). Prior to returning the product, you must obtain from TrailRax a Return Merchandise Authorization Number (RMA#) by contacting TrailRax at the address or phone number below. You are responsible for properly packaging the product to be returned. Please attach your name, address, telephone number, and a copy of the RMA form with ticket number, as well as a detailed description of the problem for which service is requested. If the repairs are covered by this warranty and if the product was properly shipped to TrailRax, TrailRax will pay the return shipping charges (domestic addresses only). This warranty applies only to TrailRax products manufactured by TrailRax that can be identified by TrailRax product trademarks, trade names, or logos affixed to them.

The original purchaser is responsible for shipping expenses to return the product to TrailRax. 

385-777-2601

1654 W 1250 S, Unit 2

Woods Cross, Utah 84087

TRAILRAX HAS THE RIGHT TO REFUSE/VOID A WARRANTY IF THE PRODUCT  FALLS UNDER ANY OF THE VOID ACTIONS AS STATED BELOW; AND WILL NOT  BE ELIGIBLE FOR EXCHANGE, REFUND OR WARRANTY CONSIDERATION. 

ACTIONS THAT WILL VOID YOUR WARRANTY 

  • IF PRODUCT WAS NOT PURCHASED DIRECTLY FROM TRAILRAX OR  AUTHORIZED TRAILRAX RETAILER OR DISTRIBUTOR. 
  • PROOF OF PURCHASE CANNOT BE PROVIDED. 
  • INSTALLATION OF THE PRODUCT ON THE WRONG VEHICLE OR MODEL. 
  • IF DETERMINED THAT PRODUCT OR INSTALLATION WAS MODIFIED,  CHANGED, ALTERED OR CUSTOMIZED IN ANY WAY. 
  • REINSTALLATION OF PRODUCT ON ALTERNATE VEHICLE.
  • INSTALLATION OF THE PRODUCT WAS IMPROPER. FOR EXAMPLE, CROSS THREADING HARDWARE.
  • USER NEGLIGENCE AND CARELESSNESS IS OBSERVED


This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

OUR 90 DEGREE BEND

We added a bend into our 5052 Aluminum side panels to drastically increase durability and strength. This helps us achieve the highest rated rack for its low profile. This bend also offers full 360 degree mounting area on the rack, you are now not limited to where your TSLOTS are mounted.

Our wind deflector angle

We engineer the angle of the deflector to match the angles of your Gladiator for minimal wind noise and a perfect look, almost like it should have come from factory with the TrailRax Modular Roof Rack.

2 piece design

Our Rack is designed in 2 pieces; a front and rear half. Both the front and rear halves utilize an outer clamp system with an interior bracket to distribute load. This design allows for removal of either half while the other still remains functional. Run the back half when you want to remove your freedom panels, the front half for a camper setup or keep it all together for maximum storage capacity. However you choose to use it, this rack was designed for you.

 

The most rugged roof rack available for your Jeep Gladiator! This Aluminum roof rack offers an assortment of ways to mount gear and tools for your next adventure. We use 5051 3/16" aluminum for the main panels that give extreme rigidness and durability for all the gear you plan to equip your Jeep Gladiator with. We also have a large number of accessories available with this roof rack that will allow endless combinations and possibilities for the end-user. 

This Modular Roof Rack is offered in front half only or the full rack! 

We added a wind deflector to the roof rack to eliminate wind-noise all together. Our deflector angle is designed to match the windshield angle so you keep your aero dynamics as well as have a rack that looks like it should have come from factory. We also worked with our friends at Heretic Studio to work on a cut-out to flush fit an offroad light onto the wind deflector. This combination of our roof rack and Heretic's 50" or Baja Designs S8 40" light will allow the light to sit below the top face of the aluminum TSLOT so that the rack is completely level for those larger items on the rack.

 

Our Aluminum extrusions/TSLOTS that come with the rack are anodized black and cut to length with absolute precision. The extrusions are made locally here in Utah and have a high-stress rating as well as deflection rating giving the user the best load capacity possible.

Our one-piece side panels for the roof rack offer extreme durability and capacity to the rack itself. It also offers a 90-degree bent channel that gives the end-user a full 360 degree area to mount even more accessories. These panels also come precut with slots to add more extrusions and tools to the side panels, offering more modularity and customization.

The mounting system uses CNC cut and bent Aluminum feet that distribute the load of the rack directly to the roof of the vehicle. It is mounted into reinforced parts of the cab that are perfect for load bearing roof racks. We designed this Modular Roof Rack to do everything that the Gladiator Rubicons were designed to do.

Our TrailRax Modular Roof Rack line is a great option for the all-out overlanders or desert racers as well as the entry-level overlanders or off-roaders. This rack gives the end-user the ability to upgrade or add to their roof rack as they need.

    Brand's and Products recommend using with our TRMR Rack:

    While you are not limited to these brands, these brands worked with us along the way in designing the rack. This gives us and them the ability to work with their products within the design to make sure everything fits properly and works together in harmony. If you are looking to accessorize your TRMR Rack, look no further than these brands if you want high-quality products that fit directly to your TRMR Rack with no headaches. 

    Hit this link!

     

    Camper Compatibility

    GoFast Campers - Standard Half Rack

    Harker Outdoors - Standard Half Rack

    Alu-Cab ModCap/Canopy Camper - Alu-Cab Half Rack

    Explore Elevated - Alu-Cab Half Rack

     

    Specs:

    • Fits Jeep Gladiator 2020+ with hard top
    • Overall height added to your Gladiator - 4.3" from the outside edge to the top of the rack or 3.6" from the center of the hardtop to the top of the rack
    • Static load rating of the rack: 400 lbs evenly distributed across the rack
    • Dynamic load rating of the rack: 200 lbs evenly distributed across the rack